General
Specifications
Power
Range: 0.25 to 4 kW (0.33 to 5 HP)
Supply Power:
Single Phase: 120 / 208 / 220 / 240
VAC
Three Phase: 208 / 220 / 240 / 480
VAC
(+10/-15%) 50 or 60 Hz
Motors: The SCM is designed to operate standard
polyphase induction motors rated for 208, 230, 400 or 460 VAC from 0 to
240 Hz.
Enclosure: IP20 with finger safe terminals.
Standard Features
Easy Set-up and
Operation: The SCM is easy to use right out of
the box or can be customized to meet your specific requirements any one of
four convenient ways:
• From the front of
the drive
• The Remote
Keypad option
• The innovative EPM
Programmer.
• A PC using AC Tech’s free TechLink
Software and the EPM Programmer
Motor Thermal Overload: Approved as a motor protection
device for single motor applications.
Control I/O: Eleven isolated terminals provide
connection for 0-10V or 4-20mA reference, 1 fixed and 3 programmable logic
inputs and 1 programmable relay output.
Quiet Operation: Adjustable carrier frequency to
10kHz. |
SCM
Options
Remote Keypad:
Simple 4 connection to SCM
provides operation and programming functions. Construction and gasket
permit construction integrity up to NEMA 4X (IP65).
DIN Rail Mounting Kit:
Allows easy
mounting of the SCM Drive onto standard DIN Rail.
Dynamic Braking Kit:
Prepackaged resistor
modules with control electronics provide easy mounting within the control
cabinet.
Through Hole Mounting:
The SCM Series can be
ordered for through hole mounting that puts the drive heat sink outside
the electrical enclosure for better thermal management and space savings.
Ships on black anodized heat sink with gasket that will meet NEMA 4 and
NEMA 4X (IP65) construction.
EPM Programmer:
Copy drive programs in 2
seconds using The EPM Programmer! Then just plug the EPM into the SCM
Series drive and it’s ready for operation. The EPM Programmer also
provides full programming capability using the backlit LCD display and
file exchange with a Personal Computer.
View SCM Models
|
