|
General
Specifications
Horsepower: ¼ to 25 HP (0.18 to 18.5kW)
Supply
Power: Single
Phase: 208 or 240VAC Three Phase: 208, 240,
400, 480 or 590VAC 50 or 60 Hz
(+10/-15%)
Motors: The
SCF is designed to operate standard polyphase induction motors rated for 200,
230, 400, 460 or 575VAC from 0 to
240Hz. Operation to 1000Hz is
optional.
Enclosure: Rugged IP20 with finger safe termi-
nals.
Standard
Features
Easy Set-up
and Operation: The
SCF is easy to use
right out of the box or can be customized to meet your specific requirements any one of
four convienient ways:
• From the front of the drive • From the remote keypad option • A PC (and AC Tech’s free TechLink
Software) • The innovative EPM
Programmer.
Motor
Thermal Overload: The SCF is an approved motor protection device for single
motor applications by UL and
cUL.
Control
I/O: 18 isolated
terminals provide 5 logic inputs, 2 logic outputs, 2 analog inputs and
2 analog outputs plus RS485 Modbus
Serial Communication. |
SCF
Options
NEMA 4X
Remote Keypad: Connects to SCF over RS485. Allows opera-
tion and programming of the drive.
High
Frequency Output Option: Contact AC Tech for SCF Models for high
speed applications up to 1000Hz.
DIN Rail
Mounting Kit: Allows easy mounting of the SCF Drive onto
standard DIN Rail.
Dynamic
Braking Kit: Prepackaged resistor modules with control
electronics provide easy mounting within
the control cabinet.
Through
Hole Mounting: The SCF Series can be ordered for through
hole mounting that puts the drive heat
sink outside the electrical enclosure
for better thermal management and
space savings. Ships on black
anodized heat sink with gasket that will meet NEMA 4 and NEMA 4X (IP65) construction.
EPM
Programmer: This compact battery operated option allows
programming the EPM (on the front of
each drive) directly and without
power to the drive! Copy drive
parameters easily or write new ones using the backlit LCD display that uses
real language
programming.
View SCF Models
|
 |
